Which diameter should you choose? Measure the inside of your duct, from edge to edge through the centre: your measurement is the diameter to order (Ø80mm, Ø100mm, Ø125mm, Ø150mm, Ø160mm or Ø200mm).
In brief
304 stainless steel air outlet grille with built-in non-return flap, for cooker hood, extractor fan, tumble dryer and ventilation on DN150. Rubber seal and screws included.
Automatic non-return flap : the flaps open with the airflow and close by themselves when it stops: cold air and odours no longer come back down the duct.
Ø150 mm (DN150) : connects directly to 150 mm ducts, hoses and sleeves of cooker hoods, extractor fans, dryers and ventilation systems.
Fitted in 10 minutes : rubber seal and fixing screws included.
Outdoors and indoors : facade, gable wall, plinth or plant room; the grille rinses clean with water.
304 stainless steel : resists corrosion, frost and UV. French brand DOMUX, 2-year warranty with standard exchange.
Technical data
Material: 304 stainless steel
Nominal diameter: DN150 (150 mm)
Dimensions: 185 x 185 x 82 mm
Shape: square
Non-return flap: yes
Insect mesh: no
Contents: 1 grille, 1 rubber seal, fixing screws
Uses
Cooker hood outlet, through the wall or on the facade
Bathroom, toilet and utility room extractor fan outlet
Vented tumble dryer outlet, DN150
Choose the right diameter
Which diameter should you choose? Measure the inside of your duct, from edge to edge through the centre: your measurement is the diameter to order (Ø80mm, Ø100mm, Ø125mm, Ø150mm, Ø160mm or Ø200mm).
Validate your login